Blog

The photographic blog of Sean Wood (aka motionid)

Kodak Autographic Brownie

 

A recent comment on a Tokyo Tower photo I took a while back prompted me to write this post. I shot the photo with a early 1900's Kodak Autographic Brownie no.2 using a Fuji Polaroid back. The camera originally took a different kind of film that is no longer made. After checking the camera I thought I might be able to get away with using 120 film but could not work out a way to modify the original camera back without destroying it. And given the camera is actually not mine and kind of on permanent loan I figured that would not be a good idea. So I though perhaps I could connect a Polaroid back to it. After checking the size of my Hasselblad back with the camera it looked like the idea was going to work. But I needed to find a back that did not have a little window (like the Hasselblad or Mamiya) but had the film area fully exposed when the dark slide was out. A trip to the local camera store immediately paid off. I found myself a Fuji back in the junk bin for ¥525 which was quite lucky because I didn't want this little test to cost me and end in failure. I figured the easiest way to connect the back to the body would be with electrical tape and that once I had proved it would work I'd figure out a more permanent solution. After reading on line and discovering that the aperture would be around f/9 at it"s widest I took a shot and hoped for the best. The image you see above is the result I got. I was quite surprised at how the image turned out. You will see from the other images below how I modified the camera and the controls it offers. F/9, f/19, f/22. T, B, 25th, and 50th of a second shutter. And a viewfinder that is very cool and at the same time very hard to use. Feel free to share your old camera mod stories in the comments area below.